Search:
     
3CX Phone System for Windows Download the Free Edition

Asterisk hardware

Page Contents


This page is a reference page of hardware that is known to work with Asterisk.
For finding out how to determine the hardware sizing needs of your Asterisk system see Asterisk dimensioning.

For phones to use with Asterisk, including VoIP phones (both hard and soft phones) and Analog Telephone Adapters, see Asterisk phones.

PSTN Interface cards (analog, GSM, ISDN-PRI and R2/MFC)


This section contains hardware for connecting analog or digital phone lines from the Public Switched Telephone Network to your Asterisk server.

*astTECS


Asterisk.PBX.In


Single port FXO Card

Atcom

  • IP04: 4 ports fxo/fxs asterisk embedded ippbx
  • IP08: 8 ports fxo/fxs asterisk embededded ippbx
  • AX-100P: one fxo pci card, compatible digium x100p
  • AX-400P: Suitable for SOHO PBX application.
  • AX-1600P: 16 ports anolog pci board
  • AX-4E: Same as Tormenta2 and Digium's E400P cards
  • AX-4T: Same as Tormenta2 and Digium's E400P cards
  • AX-4S: 4 Basic Rate Interface ports (I.421) for TE and NT mode
  • AX-1E: One PRI port 30 channels

beroNet

  • BN2S0: 2xS0/2xBRI (TE/NT) PCI interface card for Asterisk
  • BN4S0: 4xS0/4xBRI (TE/NT) PCI interface card for Asterisk
  • BN8S0: 8xS0/8xBRI (TE/NT) PCI interface card for Asterisk
  • BN2S0 miniPCI: 2xS0/2xBRI (TE/NT) miniPCI interface card for Asterisk
  • BN4S0 miniPCI: 4xS0/4xBRI (TE/NT) miniPCI interface card for Asterisk
  • BN1E1: 1xE1/1xPRI PCI interface card for Asterisk
  • BN2E1: 2xE1/2xPRI PCI interface card for Asterisk
  • BN1E1 miniPCI: 1xE1/1xPRI miniPCI interface card for Asterisk
  • BN1GSM: 1xGSM (2 SIM card holders) interface card for Astersik
  • BN2GSM: 2xGSM (4 SIM card holders) interface card for Astersik
  • BN3GSM: 3xGSM (6 SIM card holders) interface card for Astersik

BroadTel


Professional Asterisk Hardware provider:

CTVON



Digium


Digivoice

  • VB0408PCI - 4/8 FXO, with built in aLaw, uLaw and GSM codec, Echo Cancelation into DSP
  • VB0404FX - 4 FXS, with built in aLaw, uLaw and GSM codec, Echo Cancelation into DSP
  • VB6060PCI - 2 E1, with built in aLaw, uLaw and GSM codec, Echo Cancelation and R2D/MFC protocol into DSP
  • VB3030PCI - 1 E1, with built in aLaw, uLaw and GSM codec, Echo Cancelation and R2D/MFC protocol into DSP


Dialogic Eicon

The Diva Server V-Series provides a dedicated range of telephony adapters that provide rich media processing capabilities for enabling voice, speech and conferencing applications. For an explanation of the different cards please see this document

ELGATO Communications

  • PCI Interface 8-channel GSM card
    • ELGATO 8-channel PCI GSM card 8 GSM-modules (900/1800/1900 Mhz), 1 SIM-card per channel (and SIM-Server support), DTMF receiver, Digital sound processing (with possibility of hardware compression: G.729, G.726, G.723), Light-emitting diode indication of channels work
  • ISA Interface 8-channel GSM card
    • ELGATO 8-channel ISA GSM card 8 GSM-modules (900/1800/1900 Mhz), 1 SIM-card per channel (and SIM-Server support), DTMF receiver, Digital sound processing (with possibility of hardware compression: G.729, G.726, G.723), Light-emitting diode indication of channels work

IXC harware/software manufacturer.


Ukrainian telecommunication company, which develops and manufacture a wide range of contemporary information systems and technologies for communication enterprises.


OpenVox


Parabel

  • Quasar E1 - 4/8 E1, PCI/PCIe or PMC interface cards.
  • Quasar M - 1/2 E1, PCI/PCIe interface cards.
  • Asteroid - The voice channel bank of FXS/FXO ports (up to 30), connection to Asterisk server through E1 or Ethernet ports (TDMoX).
  • ELF2-AE - External E1 interface device for Asterisk, connection to Asterisk server through Ethernet (TDMoX) with Hot-plug support.


PhonicEQ Inc - The creator of Tormenta III card

PhonicEQ Inc - Affordable Quad/Double/Single T1/E1/J1 and BRI/Analog PCI cards and more! -> http://phoniceq.com

Pika Technologies Inc


For System Integrators and Asterisk resellers who are familiar with FreePBX, Elastix, Trixbox CE and similar products, PIKA now has a FreePBX image optimized and pre-loaded on the PIKA WARP appliance. With the WARP ENTERPRISE PBX platform, PIKA has eliminated all the integration issues that you may have experienced in the past with PCs (obsolete hard drives, motherboards etc). Whether your customers require SIP only configurations or prefer the safety of added PSTN connectivity, WARP Enterprise with your optionally added application for differentiation is ideal for the SMB market.

For Asterisk® / FreePBX® developers requiring GSM connectivity for wireline replacement, Least Cost Routing (LCR), or SMS notification, PIKA now offers a GSM module for the WARP Appliance for Asterisk®. The GSM module provides two GSM channels/radios per module and uses two externally accessible SIM cards. The module can work in combination with other WARP Appliance expansion modules (FXO, FXS, BRI).




Positron Telecom

    • The V-Series from Positron is the ONLY PCI card on the market where you dont need a ZAP/DAHDI driver as the cards all install as Ethernet adapters. Suitable for all SIP based applications, the V-Series provides all the telephony needs for enterprises and makes it easier and faster to use than any other adapter.




Redfone

  • REDFONE Communications Quad or Dual T1/E1 to Ethernet bridge.
    • Solid-state appliance designed for deploying high-availability, redundant Asterisk clusters.

Rhino Equipment Corp

  • Analog PCI Plug-In telephony cards
    • R4FXO-EC - 4 Analog Lines PCI Plug-In Card with on-board Echo Cancellation
    • R24FXO-EC - 24 Port FXO PCI Plug-In Card with on-board Echo Cancellation
    • R24FXS-EC - 24 Port FXS PCI Plug-In Card with on-board Echo Cancellation
    • R8FXX-EC - 8 Analog Channels Modular PCI Plug-In Card with on-board Echo Cancellation
    • R24FXX-EC - 24 Analog Channels Modular PCI Plug-In Card with on-board Echo Cancellation
    • Dual FXO Module - Dual FXO Module for R8FXX & R24FXX Modular Cards
    • Dual FXS Module - Dual FXS Module for R8FXX & R24FXX Modular Cards
  • Digital PCI cards
    • R1T1 - 1 Port E1/T1/J1 Digital Telephony PCI Plug-In Card
    • R1T1-EC - 1 Port E1/T1/J1 Digital Telephony PCI Plug-In Card With Echo Clear
    • R2T1 - 2 Port E1/T1/J1 Digital Telephony PCI Plug-In Card
    • R2T1-e - 2 Port E1/T1/J1 Digital Telephony PCI Express Plug-In Card
    • R4T1 - 4 Port E1/T1/J1 Digital Telephony PCI Plug-In Card
    • R4T1-e - 4 Port E1/T1/J1 Digital Telephony PCI Express Plug-In Card
    • Echo Cancellation Module(EU) - Echo Cancellation Module for all Digital PCI Plug-In Cards
  • Channel Banks
  • Ceros - Ceros telephony system
  • Ceros-Mini - Ceros Mini 1U telephony system

Sangoma cards


SIPbase

External solution for connecting every VoIP-PBX with ISDN-Network (BRI or PRI). 100% reliable, no hardware and software conflicts and very easy to setup.

Sirrix AG

  • Digital Interface Cards
    • Sirrix PCI4S0EC 4 Port BRI-Card (NT/TE) w/hardware echo cancellation and optional link encryption
    • Sirrix PCI4S0 4 Port BRI-Card (NT/TE) w/optional link encryption
    • Sirrix PCI2E1 2 Port PRI-Card (NT/TE) w/hardware echo cancellation with conference bridge and optional link encryption

Synway Asterisk Hardware

  • Analog Telephony
    • FXM3200P: 2 Port - 32 Port Expandable PCI Analog Card + 32MS Echo Cancellation
    • FXM3201P: 2 Port - 32 Port Expandable PCI Analog Card + 128MS Echo Cancellation
    • FXM3200E: 2 Port - 32 Port Expandable PCIe Analog Card + 32MS Echo Cancellation
    • FXM3201E: 2 Port - 32 Port Expandable PCIe Analog Card + 128MS Echo Cancellation
    • FXD400: 2 port - 4 port Daugherboard
    • FXO200: 2 port FXO module
    • FXS200: 2 port FXS module
    • FXC200: 1 port FXO and 1 port FXS combine module

  • Digital Telephony
    • TEJ100P Single Port T1/E1/J1 PCI Digital Card + 32MS Echo Cancellation
    • TEJ101P Single Port T1/E1/J1 PCI Digital Card + 128MS Echo Cancellation
    • TEJ200P Dual Ports T1/E1/J1 PCI Digital Card + 32MS Echo Cancellation
    • TEJ201P Dual Ports T1/E1/J1 PCI Digital Card + 128MS Echo Cancellation
    • TEJ400P Quad Ports T1/E1/J1 PCI Digital Card + 32MS Echo Cancellation
    • TEJ401P Quad Ports T1/E1/J1 PCI Digital Card + 128MS Echo Cancellation
    • TEJ800P Eight Ports T1/E1/J1 PCI Digital Card + 32MS Echo Cancellation
    • TEJ801P Eight Ports T1/E1/J1 PCI Digital Card + 128MS Echo Cancellation
    • TEJ100E Single Port T1/E1/J1 PCIe Digital Card + 32MS Echo Cancellation
    • TEJ101E Single Port T1/E1/J1 PCIe Digital Card + 128MS Echo Cancellation
    • TEJ200E Dual Ports T1/E1/J1 PCIe Digital Card + 32MS Echo Cancellation
    • TEJ201E Dual Ports T1/E1/J1 PCIe Digital Card + 128MS Echo Cancellation
    • TEJ400E Quad Ports T1/E1/J1 PCIe Digital Card + 32MS Echo Cancellation
    • TEJ401E Quad Ports T1/E1/J1 PCIe Digital Card + 128MS Echo Cancellation
    • TEJ800E Eight Ports T1/E1/J1 PCIe Digital Card + 32MS Echo Cancellation
    • TEJ801E Eight Ports T1/E1/J1 PCIe Digital Card + 128MS Echo Cancellation

  • VSPARK IP-PBX
    • VSPARK, the IP-PBX based on open source and next generation network (NGN) technology, not only delivers all functionalities of traditional PBXs, but provides an array of NGN communications features and benefits, which traditional PBX systems could not offer.


Uni-Ta


Varion

Zapata Telephony T1 and E1 cards: http://www.govarion.com

Voicetronix cards


Xorcom

Asterisk Telephony Interface Modules and Stand-alone iPBXs

X100P.com

Single port FXO Card
  • Authentic X100P Special Edition One port FXO PCI Interface for Digium Asterisk
  • Special Edition: 3.3+5v PCI, Global Line Compat. +More!
  • DTMF Detection and Voice Quality Tested under Asterisk
  • All Product comes with 1 Year Limited Warranty

Voxzone.com

Single port FXO Card

ZapMicro

  • Analog Interface PCI cards
    • ZMA100P - Single port analog interface card
    • ZMA400P - Quad port analog interface card series: With SoftEcho Echo Cancellation Software
    • ZMA800P - Octal port analog interface card series: With SoftEcho Echo Cancellation Software
  • Digital Interface PCI Cards
    • ZMD110P - Single port Digital interface E1/T1 card
  • Analog Modules

  • A400P: Zaproink high performance Asterisk device; 4 port analog telephony devcie for SOHO PBX application. Full compatible with Asterisk / ZAPTEL.

  • E400P: Zaprolink High performance Asterisk device; 4 port Digital telephony devcie; Support 4 E1 with PRI ISDN protocal. Full compatible with Asterisk / ZAPTEL.

X100P clone cards.

These are voice WinMODEMs marked with Intel 537, Ambient MD3200, or Motorola 62802 chipsets. These cards install and behaves exactly like a Digium Wildcard X101P card. (There are problems with intel 537EP & FA82537EP chipsets, but the 537PU & 537PG should work.) OEM X100P "clone" cards are sold based upon this soft modem chipset. People report very mixed results. Most start their Asterisk learning with these very inexpensive cards.

There are some possible Caller ID issues: Getting the following checksum error on the CLI, but the information is still passed correctly.
      • NOTICE[-1252213840]: callerid.c:238 callerid_feed: Caller*ID failed checksum
Actual Caller ID problems are confirmed on one particular Motorola based card.


ISDN-BRI Interface cards (can be used as PSTN cards, or as terminal equipment)


ATCOM

    • AX-4S:4 Basic Rate Interface ports (I.421) for TE and NT mode

beroNet


Eicon


    • Diva Server provides a set of robust all-in-one communication adapters for the integration of multiple applications, including Fax, Unified Messaging and Voice - all on a common hardware platform. For an explanation of the different cards please see this document


Junghanns


OpenVox

    • B200P 2 port ISDN BRI card + Buildin NT Power supply (mISDN and bristuff driver)
    • B400P 4 port ISDN BRI card + Buildin NT Power supply (mISDN and bristuff driver). Card is quite similar to the Junghanns one.
    • B800P 8 port ISDN BRI card + Buildin NT Power supply (mISDN and bristuff driver).

PhonicEQ Inc


Sangoma

  • B700 FlexBRI new BRI and analog hybrid card with Octasic HWEC

Sirrix.PCI4S0

    • Sirrix.PCI4S0 card providing 4 S0-ports (NT and TE), hardware switching, full featured ISDN stack and encryption of ISDN connections (optional). See also Sirrix ISDN channels.

Vlines

    • Vlines access_4S0 4x S0-ports (NT and TE). Based on HFC-4S Cologne Chip: compatible to mISDN, BRIstuff & vISDN

Xorcom

  • Xorcom Astribank BRI. May also have FXS modules.
  • any cheap HFC-S PCI chipset based ISDN card, can be used in either TE or NT mode - see zaphfc as part of zaptelBRI
  • any CAPI compatible passive ISDN card (popular example: AVM Fritz! PCI) - see chan_capi

PC/Server Motherboards


While Asterisk will run on many different systems, the limitations will be determined by what type of interface cards you choose for connecting to phone lines or phones.

PCI Slot Requirements: Carefully check what the requirements are for any PCI card you select in terms of PCI slot type, 5 volt vs. 3.3V, 32 bit vs. 64 bit, 33 Mhz or higher. The X100P clone cards require 5 volts and won't work in motherboards that can't supply 5 volts. The cards should be keyed so they will only fit in 5V slots, but at least some of the clone cards have the notch in the PCI connector that will allow them to fit into 3.3V slots. Symptoms of putting a 5V card in a 3.3V only slot is that the system won't power up.

Pictorial guides to identifying types of PCI slots:

The DIGIUM TE410 PRI card, requires a motherboard with a 64bit 3.3v PCI slot. Given the bandwidth requirements, it would be better to have a 133Mhz slot if available.

The newer DIGIUM TE405P PRI card uses the more commonly available 32bit 5 volt PCI slot, so you have a wider selection of motherboards for this card. Other than the PCI slot type, this board is virtually identical to the TE410P.

Note: Some cards like the TDM400's are 3.3V cards, but to make up for their higher power requirements, they require an available hard drive power connector in order to get 5V or 12V. If all of your connectors are in use you may require a Y (splitter) cable.

PCI interrupts: A lot of issues are reported with MB's that share interrupts on a single PCI slot, with the Digium hardware. Better quality MB's allow BIOS specifcation of the IRQ to a PCI slot to avoid this issue.

See also: Asterisk hardware interrupts

You can use the command "cat /proc/interrupts" to see the interrupt allocations and possible conflicts.
The command "lspci -bv" can also provide additional information regarding IRQs.

If you find the interrupts are not shared, but hear ticking noises in your digium hardware anyhow, I've discovered the IDE harddisk write can be the cause. Digium support susguested the following command. $ hdparm -u1 /dev/hda This command sets "get/set unmaskirq flag (0/1)". By default the disk will ask for interrupt priority to write to the disk. Changing this setting hardly affects performance, but the sound problems go away.

The DIGIUM T100P has issues with at least one chipset (the SiS 740) with shared-memory onboard video. If you're trying to run a T100P or TE4xx on a board with shared-memory video, and the zaptel driver locks up the computer soon after you configure the spans with ztcfg, try adding a PCI or AGP video card, then go into the BIOS setup and disable the onboard video. The theory is that the T100P is too "busy" a device for the 740 to cope with, and causes the chipset to lock up. Machines that use dedicated-memory video (where the video chip has its own memory, just as if it were on a card) are apparently not affected. If you have this problem with another shared-memory chipset, please note it here.

There has also been trouble with the Tyan S2466 Athlon MP motherboard. When running more than two T400P boards, the system will lock up soon after starting the zaptel drivers. No workaround has been found.

Asterisk / Trixbox Hardware Compatibilty Forum



    • Supermicro
      • Supermicro 7043A-ib, 614H-Xi, kernel 2.6.9 uniprocessor and Supermicro 6014H-X8 kernel 2.6.9 SMP - T100P, Sangoma A101, 102, and A104
      • Supermicro PDSME, Intel E7230 chipset, Dual LAN, 2x 64-bit 133MHz PCI-X, 2x 64-bit 100MHz PCI-X, Sangoma A200D, 3ware 8006-2LP SATA RAID 1, kernel 2.6.9 SMP
    • Unknown
      • 7500i Systems
      • Crystal CS100 with single PIV SBC running kernel 2.6 and a single T100P - Asterisk 1.0 stable



Complete systems

IBM NEBS compliant Blade Server for Telco applications.

  • Have successfully run multiple Asterisks with HA fail over. (without dropping connected SIP calls)
  • Up to 4 processors x 8 Blades (32 3GB Xeon processors)
  • Up to 8 GB per Blade.
  • 2 1 gigabit builtin switches.
  • Redundant power supplies
  • Redundant Managent Modules

Sun Netra T1 AC200


Specs:
  • Around $150 - $300 on eBay for maxed out configurations.
  • 500 Mhz UltraSparc IIi.
  • Usually 512MB - 1GB of RAM.
  • Usually two 18GB hot swap SCSI drives.
  • One PCI slot.
  • Two 10/100 ethernet ports.
  • Two serial ports, one of which is a "lights out" port and lets you remotely power on and power off the machine.

Positives:
  • NEBS compliant.
  • Lights out management.
  • Great interrupt handling.
  • Surprisingly capable processing power.

Negatives:
  • The Zaptel drivers aren't ported to Solaris (not that I care, but you might).
  • The Zaptel drivers are not ported to mixed 32/64 bit userspace/kernelspace.
  • So you need to either run a 32 bit kernel (and 32 bit userspace) or run a 64 bit userspace (on a 64 bit kernel).


Channel Banks


Cable Info T1, Amp50, Punch Down etc


Paging Systems


GSM and other cellular networks


See also


Where to Buy

  • Belgium & Worldwide VoIPandGo.be Quick delivery by UPS. Reseller Prices Available.
  • VoIPon - Best Prices and Support on Asterisk Hardware - UK & Worldwide - Call for reseller pricing or International Shipping. VoIPon.
  • Romania - www.modulo.ro - Reseller for Digum, Sangoma, beroNet and VoiSmart Telephony Interfaces and VoIP Phones for the Romanian market
Created by: jpiterak,Last modification on Wed 28 of Jul, 2010 [06:19 UTC] by ctvon


Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - support@voip-info.org

Page Changes | Comments

 
Sponsored by:





Search: